designed and manufactured in germany designed and manufactured in germany AXIOM15ULN rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 1(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXIOM15ULN rev.: 1 date: 2016-10-31 oscillator type: ultra low phase noise miniature oc xo with sine wave output parameter min. typ. max. unit condition frequency range 80 125 mhz standard frequencies 100.000/120.000 mhz frequency stability ppm initial tolerance @ +25c 100 200 ppb v c @ vref/2 vs. operating temperature range option 2 & 3 see tables 2 & 3 steady state vs. supply voltage variation (pushing) 10 ppb v s 5% vs. load change (pulling) 5 ppb r l 5% long term (aging) per day 2 ppb after 30 d ays operation long term (aging) 1 st year 200 ppb after 30 days operation frequency adjustment range electronic frequency control (efc) 1 2 ppm efc voltage v c 0 vref v efc slope ( ? f / ? v c ) positive efc input impedance 100 k? rf output signal waveform sine wave load r l 50 ? 5% output level (note 2) +7 dbm harmonics -30 dbc warm-up time 3 min ? f final /f 0 < 0.1 ppm phase noise @ 100 mhz and 120 mhz see table 1 opti on 1 g-sensitivity 1.0 ppb/g per axis reference voltage vref output (note 3) 10.0 v supply voltage v s (note 3) 11.4 12 12.6 v current consumption (steady state) 100 ma @ +25c (note 4) current consumption (warm-up) 300 ma (note 4) enclosure (see drawing) (lxwxh) (note 5) 25.6x22.2x14 max. mm iec 60679-3 co 28 weight 10 g packing palette notes: 1. terminology and test conditions are according to ie c60679-1 and mil-prf-55310, unless otherwise stated 2. other output level on request 3. other supply and reference voltage on request 4. may be higher for wide operating temperature range 5. lower height h on request absolute maximum ratings parameter min. max. unit condition supply voltage v s -0.5 v s + 10% v v s to gnd control voltage v c -0.5 15 v v c to gnd storage temperature -55 +125 c
designed and manufactured in germany designed and manufactured in germany AXIOM15ULN rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 2(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg phase noise C option 1: 100 mhz 120 mhz offset a b c d e a b c d e unit 10 hz -90 -95 -97 -100 -105 -85 -90 -95 -97 -100 dbc/hz 100 hz -125 -130 -132 -135 -137 -118 -122 -125 -127 -130 d bc/hz 1 khz -150 -153 -155 -157 -158 -148 -150 -151 -153 -155 d bc/hz 10 khz -160 -160 -160 -163 -165 -160 -160 -160 -161 -163 d bc/hz 100 khz -170 -170 -170 -170 -170 -170 -170 -170 -170 -170 d bc/hz table 1 frequency stability vs. temperature stability lower temperature upper temperature option 2 [ppb] option 3 t [c] option 3 t [c] 05 5 0 0 a +50 10 10 1 -10 b +60 25 25 2 -20 c +70 50 50 3 -30 d +75 100 100 4 -40 e +80 200 200 5 -55 f +85 table 2 table 3 standard: 1b = -10c to +60c frequency stability [option 2] temperature range [c] 05 10 25 50 100 200 0 ~ +50 o x x x x x -10 ~ +60 o x x x x x -20 ~ +70 o x x x x x -30 ~ +70 o o x x x x -40 ~ +75 - o x x x x -40 ~ +85 - - o x x x -55 ~ +85 - - o x x x table 4 availability x = available, o = available on request, - not availa ble ordering code model option 1 [phase noise] option 2 [stability] option 3 [temperature range] revision frequency [mhz] AXIOM15ULN table 1 table 2 table 3 rev.1 100.000 example: AXIOM15ULN-c-25-1b_rev.1 C 100.000 mhz
designed and manufactured in germany designed and manufactured in germany AXIOM15ULN rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 3(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg enclosure drawing pin connections pin # symbol function 1 v c control voltage (efc) 2 vref reference voltage 3 v s supply voltage 4 rf out rf output 5 n.c. no connection 6 n.c. no connection 7 gnd ground handling and testing parameter procedure source handling and testing application note axan-011 www. axtal.com processing application note axan-012 www.axtal.com parameter procedure condition electrostatic discharge (esd) thd devices iec60749-26 hbm 2000 v smd devices iec60749-27 mm 200 v washable yes no rohs- compliant yes no * s ee a pplication n ote axan - 011
designed and manufactured in germany designed and manufactured in germany AXIOM15ULN rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 4(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg environmental conditions test iec 60068 part iec 60679-1 clause mil-std- 202g method mil-std- 810f method mil-prf- 55310d clause test conditions (iec) sealing tests (if applicable) 2-17 5.6.2 112e 3.6.1.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 5.6.3 208h 210f 3.6.52 3.6.48 test ta method 1 test td 1 method 2 test td 2 method 2 shock* 2-27 5.6.8 213b 516.4 3.6.40 test ea, 3 x pe r axes 100g, 6 ms half-sine pulse vibration, sinusoidal* 2-6 5.6.7.1 201a 204d 516.4-4 3.6.38.1 3.6.38.2 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g vibration, random* 2-64 5.6.7.3 214a 514.5 3.6.38.3 3.6.38.4 test fdb endurance tests - ageing - extended aging 5.7.1 5.7.2 108a 4.8.35 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c other environmental conditions on request data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. revision history rev. drawing date [dd.mm.yyyy] remarks author checked 1 d0 31.10.2016 first issue hh hh
|